The IAD196 converts analog voice data into IP packets and transmits data through the IP network. Number : G5AD8016813C2D Brand : HUAWEI
ConsultProduct Description
As the media access gateway of Voice over IP (VoIP) and Fax over IP (FoIP), the IAD196 is applied to the Next Generation Network (NGN) or IP Multimedia Subsystem (IMS). The IAD196 converts analog voice data into IP packets and transmits data through the IP network.
The IAD196 is connected to the NGN/IMS through the Session Initiation Protocol (SIP). It connects calls between calling and called parties through the Media Gateway Control (MGC) or SIP server.
The IAD196 can be connected to networks through the x Digital Subscriber Line (xDSL), switch, or Gigabit-capable Passive Optical Network (GPON) / Ethernet Passive Optical Network (EPON).
The IAD can transmit integrated voice and data signals to the NGN and IMS in the following ways:
The IAD is connected to the DSLAM through the RTU and is connected to the IP network through the xDSL. This mode is applied to mature xDSL copper cable networks.
The IAD is connected to the IP network through switches. This mode is applied to residential, office building, and enterprise users.
The IAD is connected to the IP network through xPON so that uplink services can be processed at high speed. This mode is applied to the scenario where fibers are laid out in residential areas and corridors.
Feature
|
Features types |
Details |
|---|---|
|
Protocol/Standard |
Session Initiation Protocol (SIP) |
|
Media Gateway Control Protocol (MGCP) without OSU |
|
|
Real-time Transport Protocol (RTP) / Real-time Transport Control Protocol (RTCP) |
|
|
Point-to-Point Protocol over Ethernet (PPPoE) |
|
|
Dynamic Host Configuration Protocol (DHCP) Client |
|
|
Domain Name Server (DNS) Client |
|
|
Trivial File Transfer Protocol (TFTP) Client |
|
|
File Transfer Protocol (FTP) Client |
|
|
TELNET |
|
|
Simple Network Management Protocol (SNMP) V2, SNMP V3 |
|
|
Simple network time protocol (SNTP) Client |
|
|
Address Resolution Protocol (ARP) / Reverse Address Resolution Protocol (RARP) |
|
|
Internet Control Messages Protocol (ICMP) |
|
|
Voice features |
Static Jitter Buffer (JB) |
|
Voice activity detection (VAD) |
|
|
Comfort noise generation (CNG) |
|
|
Echo cancellation (EC) |
|
|
Detecting and generation of the Dual-Tone Multi-Frequency (DTMF) code |
|
|
RFC2833 |
|
|
Three-party call (local audio mixing) |
|
|
Anti-jitter delay (the delay is longer than 80ms) |
|
|
G.711, G.729 and iLBC |
|
|
Cooperating with the SoftSwitch/NGN/IMS |
|
|
Packet loss compensation (PLC) |
|
|
Adjustable packaging duration |
|
|
Gain adjustment |
|
|
Voice coder conversion time is shorter than 60ms |
|
|
Long-time call |
|
|
Local switch |
|
|
Local switch when the network connection is normal |
|
|
Multiple-country adaptation for announcements of Foreign Exchange Office (FXO) |
|
|
Registration with multiple servers and making calls between multiple servers |
|
|
Message waiting indicator (MWI) |
|
|
Fax features |
T.30 transparent transmission of faxes |
|
T.38 fax
NOTE:
The IAD does not support the t38 fax when the packet has the values as follows:
|
|
|
Voice Band Data (VBD) transparent transmission of faxes |
|
|
Data features |
Obtaining the IP address in the modes of static, DHCP and PPPoE |
|
Preferred forwarding of voice data |
|
|
IEEE 802.1P/Q |
|
|
IP Precedence/DSCP tag |
|
|
Internal layer-2 switch |
|
|
10/100 Mbit/s auto-negotiation network port |
|
|
Connection of downlink LAN ports to PCs
NOTE:
One downlink port (LAN port) on IAD196 is used for debugging. The port supports only 100 Mbit/s.
|
|
|
Virtual Local Area Network (VLAN), and supportting separating media, signaling, and SNMP packets. |
|
|
Other services |
Video fallback |
|
Voice Quality Monitor (VQM) |
|
|
Reliability |
Traffic control |
|
Power-off survival with the OSU |
|
|
Survival upon IP network disconnection |
|
|
Dual-homing |
|
|
Maintenance and management |
Management modes of Local console |
|
Management through command lines |
|
|
Web configuration and management |
|
|
Pop-up help |
|
|
One-click information collection on web pages |
|
|
Upgrade on web pages through HTTP |
|
|
eSight |
|
|
Remote maintenance |
|
|
Remote upgrade |
|
|
Importing and exporting of configuration files |
|
|
Layered user management |
|
|
Alarm |
|
|
Automatic configuration through DHCP |
|
|
Automatic network check |
|
|
Product certification |
Council of Europe (CE) |
|
Reach |
|
|
RoHS (European environment protection standard) |
Specification
|
Item |
Specification |
|---|---|
|
Maximum POTS user capacity |
96. A maximum of three service boards and a minimum of one service board can be inserted.
|
|
Power supply |
100V to 240 V AC, 60Hz or 50 Hz, 3.5A 48V DC |
|
Feeder voltage |
-38V |
|
Virtual value of ringing voltage |
45Vrms |
|
Maximum power consumption |
|
|
Dimensions |
43 mm x 442 mm x 310 mm (H x W x D) |
|
Weight |
5 Kg |
|
Operating temperature |
0°C to 45°C |
|
Relative humidity |
5%-95% (no condensing) |
|
Air pressure |
70-106 kPa |
|
Altitude |
≤ 3000 m |
|
User line distance (the user line diameter is 0.4 mm and the phone is not paralleled) |
5.0 km |
|
Number of paralleled phones (user line distance ≤ 2.0 km; user line diameter = 0.4 mm) |
≤ 3 |
CN
EN
